Quick Share
CLG862H Wheel Loader
Are you still hesitating? You can contact our product experts first. Contact us!
- PRODUCT DETAILS
-
CLG862H is a new generation of domestically advanced 60-type products. The product has more advanced technology and excellent matching, enabling it to operate efficiently in various harsh environments. The product is firm and reliable, energy-saving and efficient, with a more comfortable driving environment, better super-control performance and more convenient maintenance.
Parameter configuration
Rated load capacity
6000
kg
Rated Power
180
kW
Quality of work
19500
kg
Standard bucket capacity
3.5
m³
Unloading height
3100
mm
Maximum breakout force
195
kN
Full turn tipping load
14100
kg
Unloading distance
1195
mm
Three items and
10
s
First gear speed (forward/reverse)
7.1/7.5
km/h
Second gear speed (forward/reverse)
13.8/14.5
km/h
Machine length
8628
mm
Bucket outer width
3046
mm
Machine height
3467
mm
Wheelbase
2280
mm
CLG862H Wheel Loader
PROVIDE HIGH-QUALITY SECOND-HAND CONSTRUCTION MACHINERY AND EQUIPMENT TO CUSTOMERS AROUND THE WORLD
Annual Sales Volume
Selling to more than 60 countries
Cumulative service customers
FAQ
A common fault troubleshooting for engine failure to start
Rotary Drilling Rig Engine Failure to Start (Fuel Pump Fault)
I. Basic Case Information
- Product: Rotary Drilling Rig
- Model: XCMG XR220D
- Working Hours: 3400
II. Fault Phenomenon
The engine fails to start.
III. Fault Analysis
- The starting motor circuit and key switch circuit were inspected and found to be normal.
- The diesel oil circuit from the fuel tank to the engine was checked for blockage, along with the fuel filter element; both were normal.
IV. Troubleshooting Process
- The oil inlet pipe of the fuel pump was removed, and a large oil output was observed. The hard pipe on the engine common rail was removed for inspection, and a small oil output was found.
- The high-pressure fuel pump was disassembled and cleaned, revealing severe internal wear and impurities such as oil sludge.
- The worn eccentric shaft inside the pump was replaced, and internal impurities were cleaned; the engine started normally afterward.
V. Fault Cause (Conclusion)
Severe internal wear of the fuel pump resulted in failure to build up sufficient fuel pressure, which could not meet the fuel supply pressure required for normal engine start.It is recommended that the customer use higher-quality diesel, replace the filter element in a timely manner, and clean the fuel tank regularly.
What are the regular maintenance tasks for the website?
What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?
What are the regular maintenance tasks for the website?
What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?
What are the regular maintenance tasks for the website1?
What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?
PRODUCT CONSULTING
Note: Please leave your email address and our professionals will contact you as soon as possible!
Service Hotline
Address: Room 401, 4th Floor, Office Building, No. 13, Baoyuan Road, Guangxi-ASEAN Economic and Technological Development Zone
