• 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
  • 三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
三一 SR155-5508 Rotary dilling rig
+

Quick Share

三一 SR155-5508 Rotary dilling rig

Are you still hesitating? You can contact our product experts first. Contact us!

  • PRODUCT DETAILS
  • SR155主要技术参数
    Main Technical Specification

    序号
    No.
    名         称
    Type
    单位
    Unit
    参   数   值
    Parameter
    1最大钻孔直径mmφ1500
    Max. drilling diameter
    2最大钻孔深度m44
    Max. drilling depth
    3安全钻孔作业范围mm4200
    Allowable luffing scope 
    4整机重量(标准配置下不含钻具)t48
    Weight of overall unit (standard configuration, excluding drilling tool)
    4工作状态钻机尺寸(长×宽×高)mm7550×4100×18592
    Drilling rig dimension in working condition (L × W × H)
    5运输状态钻机尺寸(长×宽×高)mm13055×3140×3265
    Drilling rig dimension in transport condition (L × W × H)
         
    5发动机
    Engine
    型号 三菱 D06FRC-TAA
    ModelMitsubishi D06FRC-TAA
    额定功率/转速kW147
    Rated power/speed
    6动力头
    Unit head
    动力头的最大扭矩kN •m155
    Max. torque 
    动力头的转速r/min5-35
    Rotational speed
    7加压油缸
    Crowd cylinder
    加压油缸最大加压力
    Max. Pushing force
    kN155
    加压油缸最大提升力
    Max. Pulling force
    kN160
    加压油缸行程
    Max.stroke
    mm3700
    8主卷扬
    Main winch
    主卷扬提升力
    Lifting force
    kN160
    主卷扬最大单绳速度
    Max. single-rope speed
    m/min80
    9副卷扬
    Auxiliary winch
    副卷扬提升力
    Lifting force
    kN60
    副卷扬最大单绳速度
    Max. single-rope speed
    m/min75
    13钻 桅
    Drilling mast
    桅杆左/右倾角°3/3
    Left/right inclination of mast
    桅杆前倾角°5
    Front/back inclination of mast
    10转台回转
    Rotary table slewing
    转台回转角度°360
    Rotary table slewing angle
    11履 带
    Crawler
    履带宽度mm700
    External width of crawler (min.-max.)
    履带外宽(最小-最大)mm3140-4100
    External width of crawler (min.-max.)

PROVIDE HIGH-QUALITY SECOND-HAND CONSTRUCTION MACHINERY AND EQUIPMENT TO CUSTOMERS AROUND THE WORLD


10000 +

Annual Sales Volume

60 +

Selling to more than 60 countries

300 +

Cumulative service customers

FAQ


A common fault troubleshooting for engine failure to start

Rotary Drilling Rig Engine Failure to Start (Fuel Pump Fault)

I. Basic Case Information

  • Product: Rotary Drilling Rig
  • Model: XCMG XR220D
  • Working Hours: 3400

II. Fault Phenomenon

The engine fails to start.

III. Fault Analysis

  1. The starting motor circuit and key switch circuit were inspected and found to be normal.
  2. The diesel oil circuit from the fuel tank to the engine was checked for blockage, along with the fuel filter element; both were normal.

IV. Troubleshooting Process

  1. The oil inlet pipe of the fuel pump was removed, and a large oil output was observed. The hard pipe on the engine common rail was removed for inspection, and a small oil output was found.
  2. The high-pressure fuel pump was disassembled and cleaned, revealing severe internal wear and impurities such as oil sludge.
  3. The worn eccentric shaft inside the pump was replaced, and internal impurities were cleaned; the engine started normally afterward.

V. Fault Cause (Conclusion)

Severe internal wear of the fuel pump resulted in failure to build up sufficient fuel pressure, which could not meet the fuel supply pressure required for normal engine start.It is recommended that the customer use higher-quality diesel, replace the filter element in a timely manner, and clean the fuel tank regularly.

 

What are the regular maintenance tasks for the website?

What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?

What are the regular maintenance tasks for the website?

What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?

What are the regular maintenance tasks for the website1?

What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?What are the regular maintenance tasks for the website?

< 1 >

RECOMMEND PRODUCTS


Content update in progress

PRODUCT CONSULTING


Note: Please leave your email address and our professionals will contact you as soon as possible!